Lutron, SeeTouch QS, QSWS2-2BN-AL-EGN

SKUM76900

Manufacturer

Mfr. Part #QSWS2-2BN-AL-EGN

Points1.82

Please call 1-888-884-0911 or email at support@mrsupply.com for more info.

Qty

Benefits of total light control
Control every light in the room with a single touch Programmable fade times provide smooth transitions between lighting scenes Integrates easily with touch screens and other A/V equipment Offers multi-location control in many elegant wallstation styles Reduce electricity usage and cut maintenance cost

Layout and installation
Wire with low-voltage cable, GRX-CBL-346S-500 Power up to three wallstations/control interfaces from a single 3000 series control unit; for more than three, use a GRX-12VDC Derating not required when ganged Each seeTouch style wallstation counts one toward system maximum 16 wallstations/control interfaces

Features

Often used in entryways to select Scene 1 and Off
Receives up to two contact closure inputs via a connector on the back of the Wallstation
14 models available with 1- to 7-scene preset, zone, partition, or shade control buttons
Available with or without raise/lower buttons and an IR sensor
When keypad is programmed as scene, panic, zone toggle or sequence, input 1 closure will perform the top button action, and input 2 closure will perform the bottom button action
When keypad is programmed as a partition control, input 1 and input 2 closures will open the partition, and input 1 and input 2 openings will close the partition
When keypad is programmed to fine-tune, input 1 controls raising (closure = start; opening = stop) and input 2 controls lowering (closure = start; opening = stop)
Large, rounded buttons are easy to use
Backlit buttons with optional engraving make it easy to find and operate the Wallstation in low light conditions
Optional button engraving is angled up to the eye for easy reading

Specification

Style	SeeTouch QS
Button	2 Buttons
Insert Style	Non-Insert
Power Input	Low-voltage type PELV (Class 2: USA). Operating voltage: 24 V
Terminals	Accept up to two #18 AWG typical
Environment	32-104 °F (0-40 °C), Relative humidity less than 90% non-condensing
Mounting	Typical backbox dimensions: 3.74 in. (95 mm) high, 2.17 in. (55 mm) wide, 2.75 in. (70 mm) deep

Product Reviews

Your Quotes