Lutron, Radio RA 2 Switch, RRD-8S-DV-WH

Lutron, Radio RA 2 Switch, RRD-8S-DV-WH

RadioRA 2, Switch, Incandescent/Magnetic Low Voltage/Electronic Low Voltage/Fluorescent/Motor Load, Single Pole/Multi-Location with Optional Shunt Capacitor, 1/10 HP, Light 8A / Motor 3A, 120/277V, White

SKUM65546
ManufacturerLutron
ColorWhite  White
Mfr. Part #RRD-8S-DV-WH
Request a quote for Better Price
UPC027557869263
Points1.44
Please call 1-888-884-0911 or email at support@mrsupply.com for more info.
   
Notice
  • Wallplates and Wallplate Adapter Sold Separately
    •
  • Remote Controller not included
    •
Benefits of total light control
  • Turn your lights on and adjust your shades to the specific level
  • Stylish products that will complement your home’s décor.Tap twice for full on
  • Control lights and shades from wall-mounted, tabletop, or handheld controls, in a specific room – or remotely from another room – or even outside your home
  • When you dim a standard halogen or incandescent light bulb by 25%, you will save 20% and extend the life of light bulbs.
System Design
  • Identify the lighting areas of the home to be controlled.
  • Install devices to control as much of the lighting within the areas as possible. This includes in-wall dimmers, table lamp dimmers and shade
  • Place at least one keypad in each lighting area
  • Choose how keypad buttons will control your light from one of the five ways to control your light
  1. Individual device control – Control of single wall dimmer, table lamp or shade
  2. Local scene – Preset scene for all lighting and shading within a room
  3. Whole home scene – Illuminates part of or most of the home for specific activity or mood
  4. Room monitoring – Allows a user to see if lights within a specific room (or entire house) are on or off
  5. 5Path of light – Illuminates a convenient path of light to take the user from one location to the next
System Components
  • Dimmers and Switches, Note : Dimmer and Switch locations with 3- and 4- way applications must use RadioRa 2 Remote Dimmers, Remote Switches, or Wall-mounted Keypads.
  • seeTouch Wall-mounted Keypads.
  • Radio Powr Savr Occupancy/Vacancy Sensors
  • Sivoia QS wireless Shades
  • Grafik Eye QS RF control units
  • Visor Control Transmitter(VCTX) and Visor Control Receiver(VCRX)
Diagram
Diagram
Features
  • On a single-tap, lights or motors turn ON or OFF
  • Some -8S-DV installations may require the use of a shunt capacitor
  • Optional shunt capacitor must be installed inside the load fixture or in a separate J-box
  • Design allows for color changes without replacing the control
  • Includes one control, one wire connector, two mounting screws
  • Coordinating Satin Colors wallplates available separately
  • Recommends using 3.5" deep wallboxes for easier installation
  • Dimmers and switches communicate with the system through Radio Frequency (RF) and must be located within 30 ft (9 m) of a repeater
Downloads
Specification
Style Radio RA 2
Type Switch
Load Type Incandescent/Halogen/Magnetic Low Voltage/Electronic Low Voltage/Fluorescent/Motor Load
Location Single Pole/Multi-Location with Optional Shunt Capacitor
Voltage (VAC) 120/277
Max Capacity (HP) 1/10
Max Capacity (A) Light 8 / Motor 3
Finish Gloss Finish
Color White
Standards UL Listed
Product Reviews